Wednesday, April 2, 2008

FLINT INDIAN SALES AUCTION, 1992

The Flint, Michigan Auction….20th and 21st October 1992.

by Dennis Quinlan

Extract from “The Flint Journal”, Thurs.22nd Oct.1992.
“The smell of leather and money was in the air
Wednesday at
Flint Indian Sales as hundreds of motorcyclists and dealers turned up for an estate auction at the N. Saginaw Street business. The event, billed as one of the largest auctions of rare and antique motorcycle parts in the U.S., included the sale of a 1941 four-cylinder Indian motorcycle, along with many other old motorcycles, some still in their original shipping crates. Herbert L. Kunze, who owned the combination bicycle/motorcycle dealership for decades, died Feb.26. His father opened the business in the 1920s.”
On October 12th, 1992, I received a fax from a UK supplier… "Was I going to the Flint Auction?”
"What auction" I faxed back.
By Sunday night (Sydney time) I had found out; there were literally tons of motorcycles and spares for sale, including motorcycle instruments (which was my business at the time). A telephone call to Bob Schanz (proprietor of Domiracer) asking if he’d bid on some items for me, elicited the reply that he was there to buy and I could in turn later buy off him…!
By late Monday I’d secured a flight from Sydney to LA, on to Chicago and then to Lansing, with a rental car booked, and arrangements made with my bank.
On the way to the airport Tuesday, I called at the school my where my wife taught and said 'see you in a week'… Flying into Chicago the weather looked ominous, and a further delay landing at Lansing due to Air Force One being on the ground (the President was in town for the great debates at Michigan State University), meant I was very late into a motel.
An eerie quietness the next morning turned out to be from a big dump of snow during the night; I was not prepared from this coming from Australia.
The auction site was an eye-opener…two large buildings, a shop and warehouse, were like a maze, which proved to be full of motorcycles…over 200 were on offer of which 60 were new & many still in their crates and parts... man, I’ve never seen so many motorcycles in boxes.
Inventories of Matchless/AJS parts, Norton, Indian, Moto Guzzi, Greeves, Zundapp, Sachs parts, shelves of Smiths, Lucas ( I’m pretty sure there were 2300 sets of ignition points for example…), Amal parts, bags of Metzeler tyres…the list went on.
There were whole rooms with used or partly dismantled motorcycles and parts.
The next surprise was having to pay US$500 to get into the auction, to be refunded when you bought something (?).
…..Some 200 bidders registered, eager for the 800+ lots listed plus the motorcycles mentioned..
Major players were British Only from Detroit and Domiracer Distributors Inc, from Cincinnati, with some UK dealers, myself from Australia and many smaller US dealers and individuals.
Many of the lots were large in quantity and this annoyed some smaller buyers…the AJS/Matchless inventory was in seven lots, but was actually auctioned off as one large lot…the auctioneer (Jerry Wood) commented, ”Whoever buys this will be the world’s largest Matchless distributor." The pile went for $110,000, to Domiracer.
One room was aptly called “The Indian Room", with heaps of pre-war Indian Parts, including new crankcases and parts for singles and the four-cylinder motorcycles…. lots of bidding activity there. The three damaged Corbin speedos I was interested in made $1300; my proposed maximum bid of $1000 was left in the dust. There were six new Norton Commandos, all but one had been riffled for some parts to sell in the past and were variously incomplete. The one complete bike went for $9750…a BIG price then.
AJS Motorcycles from the UK were present to purchase the stocks of late two-stroke AJS Stormer motocrossers (thirteen new ones, seven still in crates, for $26,500) and inventory ($15,000) . The Zundapp inventory went for $18,000; the Smiths inventory for $22,000; the Lucas electrical parts for $43,000; Amal carburetors and parts for $21,000; the Ducati parts for $21,000; Greeves inventory $1000; Norton inventory $57,000; Moto Guzzi parts $28,000;Ducati factory tools $2,100; Seven new Greeves motocrossers $13,700, and the list went on….
What was Flint Indian Sales….?
Seems Herb Kunze, the owner who had died the previous February, was a quiet man who operated the Flint dealership, which had been in operation since 1928, having been started by Herb’s father, “Speed” Kunze. Herb took over in the late 1960s. When Indian Motorcycles went out of business in 1953, the shop turned to selling Norton, Matchless, Zundapp, Penton, etc, but Kunze chose to keep the name Flint Indian Sales.
Herb was well known for sponsoring champion enduro riders. After buying Flint Indian from his father, he bought the entire building next door to sell Schwinn bicycles.
He remained in the buildings even while most of the North Saginaw Street businesses pulled out.
So did I justify the time and expense of the trip, which started out as a business venture?
The answer has to be yes…I’d never been to anything like this before, and I’d been to my share of auctions…
I spent $500 on a few items, made more friends & acquaintances, but the Smiths inventory for which I’d actually travelled, ended up with a twist….
Remember that I’d asked Domiracer to buy for me?…well soon after I arrived I met up with Bob Schanz…”You're here! " he exclaimed…. “You bet!" I answered. We drifted apart while amongst the many
items on view…but before the lot of Smiths instruments came up, his right hand man, Jonathan White, came up to me, pulled me aside, and in a quiet voice said…”Just what are you after?”…”I’ll settle for half” I replied ( fingers crossed)…. “Deal done…don’t bid against us…”. I didn’t & some months later we divvied up the Smiths instrument proceeds.
I made a brief visit to British Only, then was homeward bound; looking back now, I have a warm feeling inside to have been involved in this fascinating part of Motorcycle history.
Photos above show;- The front page of the auction catalogue; New 1950s Matchless frames wrapped in hessian sacking strips from the factory; Shelf of Dellorto carbs & parts;Boxes of new Norton Commando cylinders;Shelves of Smiths instruments;A shelf from the "Indian Room" with new 4 cyl.crankcases etc.

Tuesday, April 1, 2008

1929 Norton Model 18

by John de Kruif



We have a saying in Dutch: ’You shouldn’t tie the cat to the bacon’. Well, exactly that happened when I visited Mark Upham (British Only Austria) and his family last summer. I had seen the '29 Model 18 on his website, and told myself that I didn't need another Norton (I had three already), that it was just too expensive, far from original, and not even a flat-tanker. I should have known better. We had a very pleasant week fettling and riding many of Mark’s bikes. The Norton didn't need attention, but what harm could come of a short test ride? I wheeled it out of the showroom, started it, and rode off; it was just fantastic!
Over the next few days, I had the pleasure of experiencing many other bikes; changing their oil, fixing small problems, taking them for rides, but somehow, every day, I just had to take a spin on the Norton, liking it better and better. Eventually, Mark told me to stop fooling myself, made me an offer that I could not refuse and that settled it; I had another Norton in the shed.

This Model 18 is not a 'pretty' bike, but it looks so good, if you can appreciate the difference. Funny enough this is recognized by many non-motorcyclists. Never before on any bike did I get the 'thumbs-up' so often, from complete strangers, while sitting at a traffic light. It must be due to the bike’s purposeful look and scruffy appearance!

It’s not difficult to understand why I like this bike so much - it just goes so well! Nortons from this era are very long and low (they have been compared to ferrets) and the build quality of the frame allows for a stable ride, and very spirited cornering. Further, lack of parts like speedometer, dynamo, headlamp, and battery makes them very light, which makes acceleration quicker, and handling easier.

But what really makes this Norton special is the engine. I have a 1928 Model 18 which has essentially the same, but I immediately noticed that the '29 feels much smoother and more powerful. It revs higher and doesn’t seem to vibrate that much. On the road the '29 Model 18 is quite a bit faster than the '28, due to a stronger engine and taller gearing.

A clever engineer has had his way with the internals of this machine. Out of curiosity I lifted the head and barrel to have a look inside. Clearly, the flywheels have been lightened; normally square, they now sport polished ‘knife-edges’. The piston looks more like the slipper type you’d expect to find in a racing International engine. The inlet valve is much bigger than the exhaust valve, which is also non-standard as far as I know.

The builder found an ingenious way to convert the Sturmey-Archer gearbox to a primitive form of positive stop operation; the lever on the right side of the handlebar operates a rod that blocks first gear and neutral, leaving only second and third gear. It took a while to get used to, but it really works!

Other non-original parts include the front forks; my guess is that they were robbed from a 1930s International. The carb is a later Amal 276. The previous also owner fitted a modern Dunlop tyre to the rear wheel, which isn’t period but it has a round profile, which helps cornering a lot. I have been told that the front brake comes from a 1930s Velocette, which works well and looks terrific with that air scoop! Very nice final touches are the handmade thin-guage primary chain case, which has been crafted to fit perfectly, and the lovely Brooklands exhaust can. And it runs on Castrol R40!